Show Me Tell Me Questions: What You Need to Know for Your Driving Test
If you’re preparing for your driving test in Wood Green or Tottenham, it’s essential to understand the various components of the examination process. Among these, the “Show Me, Tell Me” questions are crucial, as they assess your knowledge of vehicle maintenance and safety. This article delves into the importance of these questions, the types you can expect, and how driving lessons in Wood Green and Tottenham can prepare you for this section of your driving test.
Understanding Show Me Tell Me Questions
The “Show Me, Tell Me” questions are an integral part of the driving test in the UK. These questions require you to either demonstrate or explain how to perform specific vehicle checks, showcasing your understanding and ability to maintain your vehicle correctly. The primary goal is to ensure that all new drivers possess the essential skills needed to ensure their vehicle is safe and roadworthy.
During your driving lessons in Wood Green and Tottenham, your instructor will guide you through these questions, ensuring you are well-prepared for your test. A proficient knowledge of these questions does not just help you pass your driving test; it also fosters responsible driving habits throughout your time on the road.
Common Show Me Tell Me Questions
The show me, tell me section of the driving test typically includes a variety of questions related to your vehicle’s safety features. Below are some examples of the types of questions you might encounter:
Tell Me: “How would you check that the brakes are working before starting a journey?”
- Upon receiving this question, you should explain your pre-drive safety check process, which includes pressing the brake pedal to ensure it feels firm and does not sink to the floor.
Show Me: “Show me how you’d check the direction indicators are working.”
- For this question, you would demonstrate how to operate the hazard lights or turn signals and visually check from outside the vehicle if the lights are functioning properly.
Tell Me: “Explain how to check that the headlights and tail lights are working.”
- You should detail how to switch on the ignition, activate the lights, and walk around the vehicle to verify that all lights are operational.
Show Me: “Show me how you’d clean the windscreen using the washer.”
- This involves showing how to operate the controls to spray washer fluid and using the wipers.
Tell Me: “How would you inspect the power steering before a journey?”
- Explain that you would turn the steering wheel just after starting the engine to check for assistance.
These examples illustrate the depth of knowledge expected of you during the driving test. To effectively answer these questions, comprehensive lessons that focus on vehicle maintenance are critical.
Preparing for Your Driving Test
To ensure that you are well-prepared for the “Show Me, Tell Me” section of your driving test, consider enrolling in driving lessons in Wood Green and Tottenham. These lessons focus not only on practical driving skills but also on the theoretical aspects, such as vehicle checks.
A qualified instructor will take time to walk you through various scenarios, helping you understand the significance of each safety check. They can provide you with practical experience and confidence, which is invaluable when it comes time to take your driving test.
Moreover, many driving schools in Wood Green and Tottenham offer mock tests that include the “Show Me, Tell Me” questions. This practice can help you become familiar with the types of questions you may face and develop a routine for how to answer these questions accurately and confidently.
Conclusion
In summary, the “Show Me, Tell Me” questions are a vital part of your driving test that cannot be overlooked. By understanding what to expect and properly preparing through driving lessons in Wood Green and Tottenham, you can increase your chances of success on your driving test. Knowledge of vehicle maintenance and safety checks will not only help you pass your test but also make you a more responsible and informed driver. Invest in your future as a safe driver today by choosing the right lessons and practices in your local area.
SHOW ME/TELL ME QUESTIONS AND ANSWERS
When it’s safe to do so, can you show me how you wash and clean the rear windscreen?
When it’s safe to do so, can you show me how you wash and clean the front windscreen?
When it’s safe to do so, can you show me how you’d switch on your dipped headlights?
When it’s safe to do so, can you show me how you’d set the rear demister?
When it’s safe to do so, can you show me how you’d operate the horn?
When it’s safe to do so, can you show me how you’d demist the front windscreen?
When it’s safe to do so, can you show me how you’d open and close the side window?
1. Tell me how you’d check that the brakes are working before starting a journey.
Brakes should not feel spongy or slack. Brakes should be tested as you set off. Vehicle should not pull to one side.
2. Tell me where you’d find the information for the recommended tyre pressures for this car and how tyre pressures should be checked.
Manufacturer’s guide, use a reliable pressure gauge, check and adjust pressures when tyres are cold, don’t forget spare tyre, remember to refit valve caps.
3. Tell me how you make sure your head restraint is correctly adjusted so it provides the best protection in the event of a crash.
The head restraint should be adjusted so the rigid part of the head restraint is at least as high as the eye or top of the ears, and as close to the back of the head as is comfortable. Note: Some restraints might not be adjustable.
4. Tell me how you’d check the tyres to ensure that they have sufficient tread depth and that their general condition is safe to use on the road.
No cuts and bulges, 1.6mm of tread depth across the central three-quarters of the breadth of the tyre, and around the entire outer circumference of the tyre.
5. Tell me how you’d check that the headlights and tail lights are working. You don’t need to exit the vehicle.
Explain you’d operate the switch (turn on ignition if necessary), then walk round vehicle (as this is a ‘tell me’ question, you don’t need to physically check the lights).
6. Tell me how you’d know if there was a problem with your anti-lock braking system.
Warning light should illuminate if there is a fault with the anti-lock braking system.
7. Tell me how you’d check the direction indicators are working. You don’t need to exit the vehicle.
Explain you’d operate the switch (turn on ignition if necessary), and then walk round vehicle (as this is a ‘tell me’ question, you don’t need to physically check the lights).
8. Tell me how you’d check the brake lights are working on this car.
Explain you’d operate the brake pedal, make use of reflections in windows or doors, or ask someone to help.
9. Tell me how you’d check the power-assisted steering is working before starting a journey.
If the steering becomes heavy, the system may not be working properly. Before starting a journey, 2 simple checks can be made.
Gentle pressure on the steering wheel, maintained while the engine is started, should result in a slight but noticeable movement as the system begins to operate. Alternatively turning the steering wheel just after moving off will give an immediate indication that the power assistance is functioning.
10. Tell me how you’d switch on the rear fog light(s) and explain when you’d use it/them. You don’t need to exit the vehicle.
Operate switch (turn on dipped headlights and ignition if necessary). Check warning light is on. Explain use.
11. Tell me how you switch your headlight from dipped to main beam and explain how you’d know the main beam is on.
Operate switch (with ignition or engine on if necessary), check with main beam warning light.
12. Open the bonnet and tell me how you’d check that the engine has sufficient oil.
Identify dipstick/oil level indicator, describe check of oil level against the minimum and maximum markers.
13. Open the bonnet and tell me how you’d check that the engine has sufficient engine coolant.
Identify high and low level markings on header tank where fitted or radiator filler cap, and describe how to top up to correct level.
14. Open the bonnet and tell me how you’d check that you have a safe level of hydraulic brake fluid.
Identify reservoir, check level against high and low markings.
